Abstract:
In this investigation, the effect of 5.6 MeV proton irradiation on the microstructure and mechanical properties of coarse grained (CG) and nanocrystalline (NC) Nb-1wt.%Zr (NZ) has been analysed. Bulk nanocrystalline microstructure was obtained by subjecting the alloy to room temperature high pressure torsion under 6 GPa hydrostatic pressure and 5 rotations. The CG and NC samples were irradiated at doses of 1.9 × 1017 p/cm2 and 1.8 × 1017 p/cm2, respectively. Microstructural parameters like crystallite size, dislocation density, and dislocation arrangements were studied in detail using X-ray line profile analysis (XLPA) by Convolutional Multiple Whole Profile (CMWP) fitting. Microscopic observations were made with electron microscopy techniques in the scanning and transmission modes. Differential Scanning Calorimetry (DSC) was performed to estimate the concentration of vacancies after HPT processing and irradiation. Tensile tests of irradiated CG and NC irradiated samples were performed and compared to those in unirradiated conditions. In the NC condition, not only did the irradiated sample show higher ultimate tensile strength but also twice the amount of uniform elongation as compared to the irradiated CG sample. The fracture surface clearly exhibited this higher plasticity post-irradiation in the NC samples. The change in deformation mechanisms due to nano-structuring of the microstructure has been anticipated to be a reason for the increase in ductility in a single-phase alloy has been explained thereafter.