Materials Engineering: Recent submissions

Now showing items 461-480 of 574

Design and manufacturing of 6-axis stewart manipulator for extrudable material deposit

Kumar, Amit (Indian Institute of Technology Gandhinagar, 2016)

Rapid prototyping is widely used for the production of plastic prototype and functional product. Filament extrusion based deposition is among the most frequently used technique called FDM. Although FDM is popularly used ...
Study on microstructural aspect of 6105 and 6463 aluminium based alloys with variation of composition and soaking time

Das, Ipsita Madhumita (Indian Institute of Technology Gandhinagar, 2016)

Aluminium-magnesium-silicon 6000 series is a major class of heat treatable alloy used in automotive industries as well as structural (architectural) accomplishments. Under the domain of extrudable alloys, 6105 and 6463 ...
Heat transfer and material flow modelling of friction stir welding of dissimilar materials: Al 6061-AZ31

Singh, Amit Kumar (Indian Institute of Technology Gandhinagar, 2016)

Dissimilar welds are widely used in automotive, aerospace and ship building industries to get advantages of selective properties of different materials. Friction stir welding (FSW) is a solid state welding process, suitable ...
Controling the microstructural aspects of AA2219 aluminium based alloy thorought hot, large strain warm and cryogenic deformation

Anjan, Sarkar Aditya (Indian Institute of Technology Gandhinagar, 2016)

In the first part of the present work, isothermal hot compression tests were conducted on aluminium alloy AA2219 to study the hot workability and microstructure evolution over wide range of temperatures (300-500oC) and ...
Design and characterization of novel antimicrobial peptide with improved antibacterial activity

Mishra, Abhijit; Majhi, Sasmita; Arora, Ankita (Homi Bhabha Centre for Science Education (HBCSE), 2017-02-23)
On the bifurcation results for fractional Laplace equations

Dwivedi, Gaurav; Tyagi, Jagmohan; Verma, Ram Baran (Wiley-VCH Verlag, 2017-01)

In this paper, we consider the bifurcation problem for the fractional Laplace equation (−)s u = λu + f (λ, x, u) in , u = 0 in Rn \ , where ⊂ Rn , n > 2s (0 < s < 1) is an open bounded subset with smooth boundary, ...
Quantitative wear analysis of H13 steel tool during friction stir welding of Cu-0.8%Cr-0.1%Zr alloy

Sahlot, Pankaj; Jha, Kaushal; Dey, G. K.; Arora, Amit (Elsevier, 2017-02)

Joining of high strength materials using friction stir welding (FSW) is difficult due to severe tool wear and change in the shape/size of the tool. However, quantitative understanding of tool wear during FSW of high melting ...
Microstructure and Mechanical Properties of Al10SiMg Fabricated by Pulsed Laser Powder Bed Fusion

Paliwal, Manas; Brochu, Mathieu; Choua, R.; Ghosh, A.; Choua, S. C. (Elsevier, 2017-02)

A series of high-density Al10SiMg specimens were fabricated using a custom built pulsed laser powder bed fusion unit operating with a pulsed-laser source. The fabricated components were analyzed using optical microscopy, ...
Shape dependent optoelectronic properties of SnS powders through optical and scanning tunnelling spectroscopy

Singh, Chetan C.; Panda, Emila (Indian Institute of Technology Kharagpur, 2016-12-12)
Labelling nanoparticles with non-radioactive isotopes

Misra, Superb K.; Valsami-Jones, Eugenia; Dybowska, Agnieszka (Taylor & Francis, 2016)
Fractional crystallization model of multicomponent aluminum alloys: a case study of aircraft recycling

Paliwal, Manas; Jung, In-Ho; Brochu, Mathieu; Muñiz-LermaManas, Jose Alberto (Springer Verlag, 2017-04)

A one-dimensional numerical solidification model has been developed to predict the recovery and refining efficiency of fractional crystallization applied to a blend of aircraft Al scraps with variations of Fe and Si. The ...
Rational design and characterization of novel antimicrobial peptides (AMPs)

Majhi, Sasmita; Arora, Ankita; Mishra, Abhijit (2016-12-08)
Experimental characterization of metal matrix composite with aluminium matrix and Molybdenum powders as reinforcement

Arora, Amit; Astarita, A.; Boccarusso, L.; Mahesh, V. P. (2016-09-07)

This paper is on the successful fabrication of Metal Matrix Composite (MMC) using an Aluminium plate and Molybdenum powder by Friction Stir Process (FSP). The aim was to produce a superficial MMC layer on the Al plate in ...
Developing self-disinfecting surface coatings using antimicrobial peptides

Majhi, Sasmita; Mishra, Abhijit (2016-12-11)
Developing self-disinfecting surface coatings using antimicrobial peptides

Majhi, Sasmita; Mishra, Abhijit (2016-12-11)
Role of tip geometry in Conductive Atomic Force Microscopy for investigating nanoscale surface electrical properties of Al-doped ZnO films

Patel, Tvarit; Panda, Emila (2016-12-12)
Influence of zinc interstitials and oxygen vacancies in carrier concentrations of Al doped ZnO thin films fabricated by sol-gel spin coating

Bandaru, Narendra; Panda, Emila (2016-12-12)
Determination of bending limit curves for aluminium alloy AA6014-T4: an experimental approach

Saxena, Krishna Kumar; Mukhopadhyay, Jyoti; Das, Ipsita Madhumita (Springer verlag, 2016-02-14)

The conventional forming limit curves as proposed by Keeler and Goodwin fail to evaluate formability in case of bending and hemming operations. This is due to the different failure mechanisms involved in biaxial forming ...
Pan-European inter-laboratory studies on a panel of in vitro cytotoxicity and pro-inflammation assays for nanoparticles

Misra, Superb K. (Springer Verlag, 2017-06)

The rapid development of nanotechnologies and increased production and use of nanomaterials raise concerns about their potential toxic effects for human health and environment. To evaluate the biological effects of ...
Thermodynamics of ultra-thin oxide overgrowths on binary AlSi alloys

Manwani, Krishna; Ajmera, Darshan; Panda, Emila (Indian Institute of Technology Kharagpur, 2016-11-05)

Now showing items 461-480 of 574

Search Digital Repository

Browse

All of DSpace
This Community
- Titles
- Authors
- By Advisor
- By Issue Date
- Subjects
- By Type
- By Degree
- By Department

Recently added

Materials Engineering: Recent submissions

Search Digital Repository

Browse

All of DSpace

This Community

My Account