Abstract:
Pharmaceutical tablet manufacturing has seen a paradigm shift toward continuous manufacturing and twin-screw granulation-based technologies have catalyzed this shift. Twin-screw granulator can simultaneously perform unit operations like mixing, granulation, and drying of the granules. The present study investigates the impact of polymer concentration and processing parameters of twin-screw melt granulation, on flow properties and compaction characteristics of a model drug having high dose and poor tabletability. Acetaminophen (AAP) and polyvinylpyrrolidone vinyl acetate (PVPVA) were used as a model drug (90-95% w/w) and polymeric binder (5–10%w/w), respectively, for the current study. Feed rate (~650-1150 g/h), extruder screw speed (150-300 rpm), and temperature (60-150°C) were used as processing variables. Results showed the reduction in particle size of drug in the extrudates (D90 of 15-25 μm from ~80 μm), irrespective of processing condition, while flow properties were a function of polymer concentration. Overall, good flowability of the products and their tablets with optimum tensile strength can be obtained through using high polymer concentration (i.e., 10% w/w), lower feed rate (~650 g/h), lower extruder screw speed (150 rpm), and higher processing temperatures (up to 120°C). The findings from the current study can be useful for continuous manufacturing of tablets of high dose drugs with minimal excipient loading in the final dosage form.