| dc.contributor.author |
Vamsi, Krishna K. |
|
| dc.contributor.author |
Talari, M. K. |
|
| dc.contributor.author |
Bandi, Bharath |
|
| dc.contributor.author |
Rowthu, Sriharitha |
|
| dc.contributor.author |
Khan, Mohammed Imran |
|
| dc.contributor.author |
Mastanaiah, P. |
|
| dc.contributor.author |
Kishore Babu, N. |
|
| dc.coverage.spatial |
United Kingdom |
|
| dc.date.accessioned |
2023-02-09T14:23:46Z |
|
| dc.date.available |
2023-02-09T14:23:46Z |
|
| dc.date.issued |
2023-02 |
|
| dc.identifier.citation |
Vamsi, Krishna K.; Talari, M. K.; Bandi, Bharath; Rowthu, Sriharitha; Khan, Mohammed Imran; Mastanaiah, P. and Kishore Babu, N., “Effect of welding speed on microstructural and mechanical properties of EB Ti-15V-3Al-3Cr-3Sn welds”, Materials Science and Technology, DOI: 10.1080/02670836.2023.2171765, Feb. 2023. |
en_US |
| dc.identifier.issn |
0267-0836 |
|
| dc.identifier.issn |
1743-2847 |
|
| dc.identifier.uri |
https://doi.org/10.1080/02670836.2023.2171765 |
|
| dc.identifier.uri |
https://repository.iitgn.ac.in/handle/123456789/8546 |
|
| dc.description.abstract |
In the current study, the influence of welding speed (500, 700 and 800 mm/min) and post-weld heat treatment (PWHT) on microstructure and mechanical properties of electron beam welded Ti-15V-3Al-3C-3Sn was systematically studied. The welds at 800 mm/min welding speed showed higher ultimate tensile strength (UTS) (751 MPa), and hardness (245 HV) compared to welds prepared with 500 mm/min welding speed (UTS 670 MPa; hardness 235 HV). The higher strength at 800 mm/min welding can be attributed to the lower columnar width of β grains and the formation of equiaxed grains at the weld root and centre. A significant increase in UTS and hardness values was observed in samples subjected to the post-weld heat treatment (PWHT) for all the weld speeds. |
|
| dc.description.statementofresponsibility |
by Krishna K. Vamsi, M. K. Talari, Bharath Bandi, Sriharitha Rowthu, Mohammed Imran Khan, P. Mastanaiah and N. Kishore Babu |
|
| dc.language.iso |
en_US |
en_US |
| dc.publisher |
Taylor and Francis |
en_US |
| dc.subject |
Welding speed |
en_US |
| dc.subject |
PWHT |
en_US |
| dc.subject |
Electron beam welding |
en_US |
| dc.subject |
Post welded heat treatment |
en_US |
| dc.subject |
UTS |
en_US |
| dc.title |
Effect of welding speed on microstructural and mechanical properties of EB Ti-15V-3Al-3Cr-3Sn welds |
en_US |
| dc.type |
Journal Paper |
en_US |
| dc.relation.journal |
Materials Science and Technology |
|