| dc.contributor.author |
Gurjar, Maniram Singh |
|
| dc.contributor.author |
Dehiya, Satender |
|
| dc.contributor.author |
Sharma, Manoj |
|
| dc.contributor.author |
Upadhyay, N.C. |
|
| dc.date.accessioned |
2014-03-17T13:44:20Z |
|
| dc.date.available |
2014-03-17T13:44:20Z |
|
| dc.date.issued |
2013-11 |
|
| dc.identifier.citation |
Sharma, Manoj et al., "Effect of Fly Ash Particles on the Mechanical Properties of Zn-22% Al Alloy via Stir Casting Method", IOSR Journal of Mechanical and Civil Engineering, vol. 10, no. 2, pp. 39-42, Nov. 2013. |
en_US |
| dc.identifier.issn |
2278-1684 |
|
| dc.identifier.uri |
https://repository.iitgn.ac.in/handle/123456789/888 |
|
| dc.identifier.uri |
http://www.iosrjournals.org/iosr-jmce/papers/vol10-issue2/G01023942.pdf |
|
| dc.description.abstract |
In the present investigation, a Zn-22%Al alloy is used as the matrix material and fly ash as the filler material. The composite is produced using powder metallurgy techniques. The fly ash is added in 2%, 4%, and 6% by wt% to the sintering metal. The composite is tested for hardness, density and tensile strength test. Microstructure examination is done using a high resolution optical microscope to obtain the distribution of fly ash in the Zn-Al matrix. Test results indicate that as fly ash content is increased, there is a onsiderable increase in hardness and tensile strength but decrease in density. |
en_US |
| dc.description.statementofresponsibility |
by Manoj Sharma et al., |
|
| dc.format.extent |
Vol. 10, No. 2, pp. 39-42 |
|
| dc.language.iso |
en |
en_US |
| dc.publisher |
International Organization of Scientific Research |
en_US |
| dc.subject |
Metal matrix composites |
en_US |
| dc.subject |
Fly ash |
en_US |
| dc.title |
Effect of Fly Ash Particles on the Mechanical Properties of Zn-22% Al Alloy via Stir Casting Method |
en_US |
| dc.type |
Article |
en_US |
| dc.relation.journal |
IOSR Journal of Mechanical and Civil Engineering |
|